Home » The Evolution of Tube Filling Machines

The Evolution of Tube Filling Machines

In 1893, the German engineering company that later became IWK built a machine to fill and close tubes of medicinal ointment, and IWK still dates its tube filling history to that order. The evolution of tube filling machines since then runs from cam-driven mechanical fillers to fully automatic packaging lines, and on to the sensor-guided controls, servo motion and ultrasonic sealing used on many machines today. This article follows that history. If you are sourcing equipment rather than researching it, our tube filling machine page covers current machine configurations, sealing options and how to request a quote.

Close-up of filling and sealing stations on a rotary tube filling machine


Key Milestones in the Evolution of Tube Filling Machines

The history of tube filling machines is documented mostly by manufacturers, so company milestones below are attributed to the company that reports them.

  • 1841: American painter John Goffe Rand patents a collapsible metal paint tube.
  • 1889 to 1890s: Toothpaste moves into tubes, with Johnson & Johnson’s Zonweiss (1889) and Dr. Washington Sheffield’s lead tubes.
  • 1893: IWK is founded; the company states its first machine filled tubes of a medicinal opium-based paste.
  • 1934: Norden dates its first tube filling machine to this year.
  • 1955: IWK reports its first fully automatic tube packaging line, pairing a TF 2 tube filler with a K 4 cartoner for toothpaste.
  • 1965: Swiss tube maker Neopac introduces its Polyfoil aluminum-barrier laminate tube.
  • Early 1970s: Multilayer laminate tubes, developed by American Can for Crest, reach mass-market toothpaste.
  • 2000s onward: Servo-driven fillers with electronic recipes appear in documented installations.

Where Did Tube Filling Technology Begin?

Industrial tube filling began in the late nineteenth century, when tubes moved from artists’ paint into pharmaceuticals and toothpaste. Early tubes were soft tin or lead, filled through the open tail and closed by folding. The first machines therefore had to hold a thin metal tube upright, dose a viscous product without smearing the tail, then flatten and fold it cleanly.

IWK’s 1893 machine is the earliest company-documented starting point in the evolution of tube filling machines. Packaging-industry accounts describe the order as coming from the Dutch colonial administration for a pharmaceutical factory in present-day Indonesia. The claim that IWK “invented” tube filling is the company’s heritage statement, not an independently established industry first.

From Manual Filling to Mechanical Tube Packaging

Before machines took over, tubes were filled with hand-operated piston devices and closed with hand tools. The limitation was operator dependency: fill weight, cleanliness of the tail and fold quality all varied with the person at the bench, and output was capped by how quickly one worker could handle each tube.

Mechanical tube fillers linked every task to a single drive. A turntable or chain carried tubes through fixed stations, and cams converted one motor’s rotation into timed movements of the dosing piston, folding jaws and discharge. That made fills and closures repeatable, but changeovers slow: a new tube length or orientation mark meant adjusting cams, chains and stops by hand, a weakness later designs set out to reduce.

How Automatic Tube Filling Lines Changed Production

The defining step came when filling was joined to the rest of the packaging process. In 1955, IWK linked a tube filler to a cartoner so that toothpaste tubes were filled, closed and boxed without manual transfer. The company describes this as its first fully automatic tube packaging line. Industry accounts of IWK’s 1960s machines describe output of around 60 finished tubes per minute.

Full automation depended on several coordinated functions:

  • Tube feeding: empty tubes delivered from magazines or hoppers into holders.
  • Orientation: each tube turned so its printed artwork faces the right way before the tail is closed.
  • Interlocks: “no tube, no fill” logic so the doser does not discharge product into an empty holder.
  • Transfer: finished tubes passed directly to cartoning.

Automation also widened the range of configurations, from operator-loaded semi-automatic units to multi-head lines, which is why manufacturers today compare tube filling options for small factories before choosing a level of automation.

The Evolution of Tube Sealing Technology

In the evolution of tube filling machines, closure technology followed tube materials, because each material can only be closed in certain ways.

Mechanical Folding and Crimping

Folding is the oldest closure method and is still used for aluminum tubes. Jaws flatten the tail, fold it two or more times and crimp it. Metal cannot be welded like plastic, so aluminum tubes still need a folding station.

Hot-Air and Heat Sealing

Plastic and laminated tubes made heat-based welding possible. In hot-air sealing, a nozzle heats the inner surface of the tail until it softens, then jaws press the walls together and the seal is cooled. Hot air works across a wide range of plastic and laminate structures, though each tube diameter normally needs a matching nozzle.

Ultrasonic Tube Sealing

Ultrasonic sealing generates heat through high-frequency vibration at the point where the two tube walls meet, rather than from a heated tool. IWK describes its ultrasonic units as suitable for plastic, laminate and recycled tubes, and notes that the sealing jaws need no warm-up or cool-down. A practical advantage is tolerance of product residue: the vibration can push creams or oils out of the seal area, which matters for oily formulas and products that contaminate the tail during filling.

How Sensors and Digital Controls Improved Tube Filling

Electronics did not change what a tube filler does; they changed how precisely and flexibly each step is controlled.

  • Presence sensors confirm a tube is seated before the doser fires and stop the machine when one is missing.
  • Eye-mark registration finds a printed mark and rotates the tube so the seal lands in the correct position relative to the artwork.
  • PLC controls and HMI screens replaced fixed mechanical timing with stored recipes, alarms and adjustable parameters, so a product change becomes a recipe selection plus change parts rather than a cam rebuild.
  • Servo motion makes the filling piston, tube lift or turntable individually programmable. Packaging World reported in 2003 that Norden was already comparing two generations of its servo-driven Nordenmatic 1002. IWK later used direct-drive rotary tables with controlled acceleration to reduce tube tipping and sloshing.
  • Inspection and data add cameras, code reading and, on some high-output lines, weight checks, linking each tube to its batch.

None of these features is universal; many current machines combine mechanical cams with electronic sensors. For a station-by-station view of the modern cycle, see our guide to the tube filling and sealing process.

How Tube Materials Changed Filling and Sealing Equipment

Every major change in tube material has forced a change in closing equipment, which makes materials one of the main drivers in the evolution of tube filling machines.

  • Aluminum: Metal shortages around World War II pushed manufacturers from tin and lead toward aluminum and plastic. Aluminum still requires folding.
  • Plastic: Polyethylene tubes, which Neopac says it produced from 1955, can be welded, opening the door to heat sealing.
  • Laminated tubes: Plastic alone could not hold some formulas. Neopac developed its Polyfoil aluminum-barrier laminate in 1965 for a toothpaste whose ingredients diffused through plain plastic. In the United States, American Can’s multilayer laminate, launched with Crest in the early 1970s, went on to become the standard toothpaste tube. Laminates are welded rather than folded, so high-volume oral-care lines moved toward heat sealing.
  • Recyclable and mono-material tubes: Recent designs replace the aluminum layer with polyethylene and an EVOH barrier, such as Neopac’s PBL Mono tube and recyclable toothpaste tubes developed with Dow and Amcor. Paper-based cosmetic tubes have also appeared, including a 2020 launch by L’Oréal and Albéa.

Newer materials can behave differently under heat and pressure, so tube suppliers and machine builders typically validate seal settings for each material rather than assuming that existing parameters transfer unchanged.

Modern Tube Filling Technology in Different Industries

The same core technology serves different priorities by sector:

  • Cosmetics and personal care: the tube is the retail package, so artwork registration and seal appearance matter.
  • Pharmaceuticals: batch coding, traceability and barrier protection keep aluminum and high-barrier laminates common for ointments.
  • Toothpaste: the first fully automatic tube line was built for toothpaste, and oral care remains a high-volume laminate tube application.
  • Adhesives and industrial creams: product residue in the seal area is the main challenge. One contract packager told Packaging World in 2017 that a non-contact hot-air system ended hourly heater cleaning caused by glue transfer.

What Is Changing in Tube Filling Technology Today?

The latest stage in the evolution of tube filling machines focuses less on raw speed and more on flexibility. Norden introduced its NF series in 2026 with a dual-lane racetrack layout, multi-SKU capability and automatic changeover. IWK’s FP 64 line, combined with an automatic tube feeder and a depalletizing collaborative robot, won the German Packaging Prize in 2017. Both aim to cut the time and manual work between production runs. Material compatibility is the other active area, as builders adapt sealing stations to mono-material, recycled-content and paper-based tubes.

The Future of Tube Filling and Sealing Equipment

Today’s documented developments point to likely directions, not certainties. Servo-driven, modular platforms may make changeovers easier for mid-sized producers, and machine data already used for alarms and batch records could support wider condition monitoring. Sealing will keep adapting to recyclable tubes, with validation still needed tube by tube. Claims of fully autonomous tube fillers deserve caution until manufacturers publish working examples.

Frequently Asked Questions

When were tube filling machines first developed?

The earliest company-documented tube filling machine dates to 1893, when IWK built one for a medicinal ointment. Collapsible tubes themselves date to Rand’s 1841 paint tube patent.

How did tube filling machines become automated?

In stages. Across the evolution of tube filling machines, mechanical drives first synchronized the stations, then complete lines linked feeding, filling and cartoning, which IWK reports first achieving in 1955. Sensors, PLCs and servo motion later added programmable control.

Why do tube materials affect sealing methods?

Plastic and laminated tubes can be welded by hot air or ultrasonic energy, while aluminum cannot be welded and must be folded and crimped. Each material change therefore required a different closing station.

How did sensors improve tube filling accuracy?

Presence sensors prevent dosing into empty holders, and eye-mark sensors align printed artwork before closing. Combined with electronic recipes and fault alarms, they made results less dependent on manual adjustment.

Conclusion

The evolution of tube filling machines follows a clear pattern. Each stage solved a limitation of the one before. Mechanical drives removed operator dependency, automatic lines removed manual handling, new tube materials demanded new sealing methods, and digital controls made changeovers and quality checks repeatable. Today’s focus on flexible automation and recyclable tubes continues that pattern.

Modern tube filling equipment offers different automation and sealing configurations. If you’re evaluating machinery for creams, gels, ointments or other tube-packaged products, explore the equipment page linked at the start of this article against your production requirements.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top