Granule Filling Machine Precision and Efficiency in Packaging
We manufacture granule filling machines at our own factory in Foshan, China, and ship them worldwide. Send us your product and target output, and our engineers will specify the machine and quote it.
How the Granule Filling Machine Works
Every granule filling machine we build doses product one of two ways. Volumetric machines measure a fixed volume and release it, which is fast and inexpensive when your product holds a steady bulk density. Gravimetric machines weigh each dose on a load cell before releasing it, which holds accuracy even when density shifts between batches.
Product feeds from the hopper into the dosing head, the machine doses to target, and the container indexes forward for sealing or capping. Our engineers set the dosing method against your product, not the other way around.
Granule Filling Machine
Features of the Granule Filling Machine
These are build features on the machines we ship, not a list of what granule fillers do in general.
- Dosing matched to your product. We select cup, weigher or auger dosing after bench testing your sample, and state the achieved tolerance in the quotation.
- Contact parts to food grade. Stainless steel product contact throughout, with 316L available where your product or regulator requires it.
- Recipe storage on the control panel. Save settings per product and per container so changeover is a selection, not a recalibration.
- Change parts supplied with the machine. Cups, nozzles or funnels matched to every container format you told us you run.
- Run-tested on your product before shipment. We record achieved fill weights at rated output and send you the results.
Applications of the Granule Filling Machine
Product behavior decides the machine, not the industry label. These are the sectors we currently supply and the configuration we usually build for each.
| Sector | Products | We usually build |
|---|---|---|
Food and beverage |
Rice, sugar, salt, coffee beans, tea,
pulses, nuts, dried fruit, snacks |
Cup filler on uniform grain,
multihead on mixed product |
Pet food |
Dry kibble, cat litter, treats |
Multihead or linear weigher |
Agriculture and chemical |
Fertilizer granules, seed, detergent
granules, water treatment media |
Cup filler or linear weigher |
Plastics and industrial |
Resin pellets, masterbatch,
abrasive media |
Linear weigher, hardened
contact parts where abrasive |
We build container handling for rigid jars, tin cans, pre-formed bags and pouches. For PET and HDPE the same dosing head runs on our bottle filling machine frames, and for metal packaging we build it into a can filling machine configuration.
Where the pouch is formed and sealed in the same pass we supply it as a granule filling and sealing machine, with sealing jaws specified against your film structure rather than your product. Our sachet packaging machine guide covers that format in detail.
What the machine will hold on your product depends on the dosing method and on how your product behaves. We do not quote a tolerance before we have tested your sample.
- Cup dosing holds tightest on product with stable bulk density and consistent particle size
- Weigh-based dosing holds tolerance through batch-to-batch density change, which is why we specify it for anything variable
- Auger dosing sits between the two and suits fine granules that bridge in a cup
- Giveaway, not accuracy, is usually what justifies the higher machine on expensive product
- We record achieved fill weights during run testing and send you the results before shipment
- We manufacture. Machines are built, calibrated and run-tested at our own facility in Foshan, not sourced and rebadged.
- We test before we quote. Send a product sample and we bench test it, then configure around what the test shows.
- We build the whole line. Filling, capping, labeling and secondary packaging from one supplier, so the line arrives matched.
- We support after installation. Wear parts held and shipped direct from Foshan, with engineering support by email and video call.
Frequently Asked Questions
It can fill rice, seeds, sugar, salt, grains, beans, nuts, coffee beans, tablets, capsules, pet food, and granular chemicals.
Yes, it can be used for bottles, jars, cans, pouches, and containers depending on the machine setup.g elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation.
Yes, granule filling machines can be used for food products such as rice, sugar, salt, grains, seeds, and coffee beans. elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation.
Choose based on your product type, granule size, filling weight, container type, and required production speed.
Yes, the filling weight can be adjusted based on product size, container type, and production needs.
Share your product type, filling weight, container size, and production speed. Our team can recommend a suitable granule filling machine for your business.
Need Help Choosing the Granule Filling Machine
Ready to work with us?